14" High Speed Segmented Blade

This Diamond blade is a must on a  high speed saw (3450-3600rpm), and it's one of the very few blade you want on the new 5hp water cooled saw. Used for cutting slabs into counter tops. It will wear down a little quicker on the lower speed saws (1700RPM) but will still cut very fast.

This blade is also a must when cutting though 4 cm glue laminated stone. The gaps between the segments keep the glue from clogging the diamond. It has an oversize thick core and a diamond wall that is just barely thicker than the steel core.

The diamond is only 0.100 inch thick, most bridge-saw blades are over 0.125 inch thick, that means this blade is 25% thinner which means more speed.

The 14 inch Silver Segmented Diamond Blade has 10mm high segments and a 60mm arbor hole.

Granite Marble Stone Floor Tile for Flooring and Wall

Color:  White, Black, Grey, Coffee, Yellow, Red, etc.

Common size of Granite & Marble tiles:

12" X 12" or 305 X 305mm

16" X 16" or 400 X 400mm

18" X 18" or 457 X 457mm

12" X 24" or 300 X 600mm

24" X 24" or 600 X 600mm

Thickness:  10mm, 12mm, 15mm, 18mm, 20mm, 30mm,etc.

Thickness Toleranc:   +/- 1mm,or +/- 2mm,Polished 85 Degree Up.

Usage:   Used For Tile, Granite Tile, Flooring Tile, Granite Slab, Marble Slab, Wall Cladding Tile, Momument, Countertop, Kitchentops, Steps, Kerbstone, Paving Stone...etc.

Finish:   Polished, Honed, Flamed, Sandblasted, Rough Hammered, Bush Hammered, Mushroom, etc.

Edge Finish:   Bevel, Straight, Bull-nose, Round Edge,etc.

Granite Tiles:

Granite is one of the hardest and most durable of all flooring tiles. Granite tile is a perfect choice for hard surface applications where durability and low maintenance is important, such as tiles for kitchen countertops, high traffic floors and tile flooring for commercial applications.

Marble Tiles:

As an elegant & high-end building material,is widely in many housing areas.we invite you to enjoy this visual feast and aunderstand marble interior flooring better.